Nations Roof - Navigation

SERVICES / REPLACEMENT

Commercial Roof Replacement & Re-Roofing Services

Certified crews, manufacturer-backed warranties, and phased installation planned around your operations — nationwide.

Free Inspections — request an estimate, no obligation.
Designed for occupied buildings
Warranty-compliant installation
Local Service, Nationwide
callout

Why Roof Replacement Matters

  • Avoid escalating repair costs
  • Maintain warranty compliance
  • Prevent operational disruption
  • Protect long-term asset value

We start with a detailed condition assessment to determine whether re-roofing or full replacement is the most cost-effective solution.

What to Expect

Replacing a commercial roof is a capital investment that impacts building performance, safety, and long-term costs. Our process is designed to deliver consistency, compliance, and confidence at every stage.

Ready to plan your roof replacement?

Get a Free Inspection
Nations-Roof-Inspection-Hard-Hats facilities-management-portals Procurement Manager Nations-Roof-single-ply-membrane-roof-1-scaled-2 safety-worker 190907_0133
STEP 01
Initial Assessment & Scoping

Roof Systems Comparison

Choosing the right system is one of the most important steps in planning a roof replacement. Here's a quick look at the strengths and limitations of the most common commercial systems.

System
Pros
Cons
Best Use Cases
TPO Thermoplastic Polyolefin Learn more
  • +Energy-efficient white reflective surface
  • +Durable seams
  • +Cost-effective
  • Puncture-vulnerable if not maintained
  • Newer track record than EPDM
Retail, office, healthcare where energy efficiency is a priority
EPDM Ethylene Propylene Diene Monomer Learn more
  • +Long track record
  • +Highly flexible, good in cold climates
  • +Cost-effective
  • Dark color absorbs heat
  • Seams need adhesive/tape maintenance
Industrial, warehouses, colder regions
PVC Polyvinyl Chloride Learn more
  • +Excellent chemical/oil resistance
  • +Strong seam welds
  • +Reflective
  • Higher cost than TPO/EPDM
  • Less flexible in very cold climates
Restaurants, manufacturing, chemical plants
Mod-Bit Modified Bitumen Learn more
  • +Multi-ply redundancy
  • +Good for high-traffic roofs
  • +Proven performance
  • Heavier, more labor-intensive install
  • Shorter lifespan vs. single-ply
Schools, hospitals, older facilities with foot traffic
Metal Metal Roofing Learn more
  • +Extremely durable, 40+ year lifespan
  • +Low maintenance
  • +Recyclable
  • Higher upfront cost
  • Expansion/contraction can stress fasteners
Warehouses, distribution centers, architectural projects
A Complete Guide to Commercial Roofing Systems

Not sure which system fits your facility?

Download the full Roof Systems Comparison Guide for lifespan, cost, and maintenance details on every system above.

Download the Guide

Nations Roof provides consistent quality, accountability, and national coverage for complex roofing programs.

Proven Safety & Compliance

Industry Leader Safety Excellence EMR 0.47 ISNETWORLD Member Contractor ISN A Rating

Proficient in Major Facility Portals

Experienced across the platforms national teams rely on every day.

Certified by All Manufacturers

Approved to install, service, and warranty all major roofing systems.

Familiarity with FM Global Approvals

Experience meeting FM Global standards for insured properties.

Proven Safety & Compliance

Industry Leader Safety Excellence EMR 0.47 ISNETWORLD Member Contractor ISN A Rating

WHY INSPECTIONS MATTER

What We Find on Roofs Every Day

Most roof problems start small and stay hidden from the ground — until water is already inside the building. These are real conditions our crews document on inspections.

Ponding water Issue Found

Ponding Water & Clogged Drains

Standing water and debris around drains add dead load and quietly break down the membrane.

Pipe flashing Issue Found

Improper Pipe Flashing

Hand-smeared mastic instead of a proper boot — a stopgap that rarely survives a season.

Wall penetration Issue Found

Exposed Wall Penetration

Unsealed conduit and crumbling mortar let water track straight into the wall cavity.

Pitch pan Issue Found

Failed Pitch Pan

Dried, cracking filler around penetrations opens a direct path for leaks below.

Sealant joint Issue Found

Failed Sealant Joints

Caulk pulling away at gutter corners leaves the wall-to-edge transition wide open.

Patch failure Issue Found

Temporary Patch Failures

Peeling tape and foil "repairs" hide active leaks instead of resolving them.

You can't fix what you can't see.

A Nations Roof inspection catches these problems early — and it's always 100% free.

Schedule a Free Inspection

Recent Projects

Agilent Technologies

SANTA CLARA, CA

Agilent Technologies

Sunpower T-5 composite framed ballasted PV system installed over Sarnafil PVC single ply membrane.

Bayland

SANTA CLARA, CA

Bayland

The 31,000 sq ft roof area was replaced using Duro-Last .050 mil fleece backed PVC membrane installed over 1/4 inch Dens Deck.

Cushman and Wakefield project

SAN LEANDRO, CA

Cushman & Wakefield

The 59,400 sq. ft area on the North Building was restored using the WeatherWeld seamless roof system surfaced with a reflective aluminum.

Davita project

HAYWARD, CA

Davita

The existing capsheet surfaced Built Up Roof was overlaid with EPS Fanfold insulation and Firestone .060 mil polyester reinforced TPO single ply.

De Rose Associates project

SAN JOSE, CA

De Rose Associates

DuroLast 50 mil PVC was installed over the existing built up roof system using EPS fanfold insulation to separate the two systems.

Delta Dental project

RANCHO CORDOVA, CA

Delta Dental

The existing capsheet surfaced fiberglass Built Up Roof system was installed over gypsum board over a steel deck.

Frequently Asked Questions

How do I know if my roof needs replacement instead of more repairs?

Warning signs include frequent leaks, trapped moisture in the insulation, failing seams, or a roof at the end of its service life.

Our team starts with a detailed inspection to determine whether your roof can be safely re-covered (re-roofed) or if a full replacement is required. We evaluate moisture levels, deck condition, insulation integrity, and warranty compliance to help you make the right decision for your building and budget.

Will a replacement disrupt tenants or building operations?

We plan projects around your operating hours and use safe, low-disruption methods. Our crews are trained to work in occupied environments — from retail stores to hospitals — with minimal impact on daily operations.

What roofing systems do you recommend?

Every property is different. We provide side-by-side comparisons of TPO, EPDM, PVC, Metal, and Modified Bitumen systems, with pros and cons for each. This allows you to choose the system that best fits your property’s needs, budget, and performance goals.

How do you help control project costs?

 Our nationwide buying power secures competitive material pricing, while our self-performing crews reduce rework and variability. That means more predictable budgets and fewer surprises for Procurement and Owners.

Do you handle permits, safety, and compliance?

 Yes. Our project teams manage all permitting requirements and follow strict safety protocols backed by an industry-leading 0.47 EMR. We’re also familiar with FM Global and ISNetworld standards, ensuring your project meets compliance expectations.

What industries does Nations Roof serve?

 You’ll receive full documentation, photos, and warranty details. All records are stored in your customer portal, giving you ongoing visibility and a foundation for long-term roof management.

Need Commercial
Roofing Help?

Get In Touch

Supporting Facilities Across Every Sector

Our crews have successfully completed projects in all 50 states and across all major facility types.